1-321-802-5889
Email Us

NSN 5305-00-040-9449

High Torque Screw

About this product

Between 2.263 inches and 2.310 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .

Manufacturer part number HT8140-5D29 for national stock number 5305000409449.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-00-040-9449.

  • MPN or Model

    HT8140-5D29

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.441 inches and 0.508 inches
  • Fastener Length
    Between 2.263 inches and 2.310 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.625 inches and 0.635 inches
  • Grip Diameter
    Between 0.3115 inches and 0.3120 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.081 inches first hole
  • Internal Drive Style
    High-torque
  • End Application
    Aircraft, phantom f-4
  • Thread Diameter
    0.312 inches
  • Grip Length
    Between 1.802 inches and 1.822 inches
  • Thready Qty Per Inch (tpi)
    24
  • Min. Tensile Strength (psi)
    125000 pounds per square inch
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    2.186 inches first hole
  • Material
    Stainless steel
  • Thread Series Designator
    Unjf
  • Specification Data
    08524-b-19019 manufacturers standard
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-00-040-9449 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305000409449

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
HT8140-5D29 Arconic Global Fasteners & Rings,
HT295-5D29 Hi-shear Corporation
106830-5D29 Sps Technologies, Llc
HT295-5D29 Lisi Aerospace Canada Corp
ST3M454-5D29 Arconic Global Fasteners & Rings,
ST3M454-5D29 Huck International, Inc.
11905-5D29 Reid Products Inc.
ST3M454-5D29 Sps Technologies, Llc
ST3M454-5D29 Sps Technologies Ltd Tj Brooks
ST3M454-5D29 Boeing Company, The
106830-5D29 Sps Technologies Inc
ST3M454-5D29 Sps Technologies Inc
BM19019-5D29 Huck Intl Inc
HT8140-5D29 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.