NSN 5305-00-058-4065
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, pan head style, between 0.331 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15234-3-4 for national stock number 5305000584065.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-058-4065.
-
MPN or Model
LS15234-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Pan -
Head Diameter
Between 0.331 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1133 professional/industrial association standard
More from these suppliers
- 5940-00-465-6149 MPN NAS1744-1Conductor Splice
- 5940-01-455-2468 MPN NAS1063A10-105BCTerminal Board Marker Strip
- 5940-01-010-1571 MPN NAS1745-15Conductor Splice
- 5305-00-006-8307 MPN NAS1218-4-36PMachine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-054-9237 MPN MS24694C125Machine Screw
- 5305-00-058-6611 MPN NAS662C2LLR7Socket Head Cap Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-058-4065 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234-3-4 | Lockheed Martin Corporation |
NAS1133-4 | National Aerospace Standards |