NSN 5305-00-082-4209
High Torque Screw
Between 0.848 inches and 0.878 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 110121T3-8 for national stock number 5305000824209.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-082-4209.
-
MPN or Model
110121T3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Nas621 comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-5019 MPN NAS1206-26Close Tolerance Screw
- 5305-00-347-8355 MPN 3M50-4-10Shoulder Screw
- 5305-00-433-4579 MPN 110132-08-6Socket Head Cap Screw
- 5305-00-454-1151 MPN NAS1133V36Close Tolerance Screw
- 5305-00-565-5399 MPN NAS1189-02T3LMachine Screw
- 5305-00-579-5988 MPN HT4025L4-7Close Tolerance Screw
- 5305-00-680-5428 MPN NAS1203-46Close Tolerance Screw
- 5305-00-890-0084 MPN NAS1203-17Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-082-4209 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110121T3-8 | Sps Technologies, Llc |