NSN 5305-00-083-3356
High Torque Screw
Between 1.472 inches and 1.519 inches fastener length, flat countersunk head style, between 0.475 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT8138-4-17T for national stock number 5305000833356.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-083-3356.
-
MPN or Model
HT8138-4-17T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.467 inches -
Fastener Length
Between 1.472 inches and 1.519 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.475 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.284 inches and 1.351 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-822-9671 MPN 51B507-06-6Machine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-191-4595 MPN HT4057-3-12Close Tolerance Screw
- 5305-01-250-0640 MPN HT4075V4-12-14Close Tolerance Screw
- 5305-01-357-2410 MPN SC5049-08-9Machine Screw
- 5305-01-497-0729 MPN HT4020-7-24DClose Tolerance Screw
- 5305-01-517-0621 MPN TX1004V3-2Machine Screw
- 5306-00-079-0907 MPN VS2521-3F10Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-083-3356 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8138-4-17T | Arconic Global Fasteners & Rings, |
106712-4-17T | Sps Technologies, Llc |
GB510AE4-17T | Northrop Grumman Systems Corporation |
HT8138-4-17T | Alcoa Global Fasteners, Inc. |
GB510AE4-17T | Northrop Grumman Systems Corporation |
106712-4-17T | Sps Technologies, Llc |
HT8138-4-17T | Alcoa Global Fasteners, Inc. |