NSN 5305-00-100-1425
High Torque Screw
Primer coating applied to head.
Manufacturer part number 3MFRA584-23 for national stock number 5305001001425.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-100-1425.
-
MPN or Model
3MFRA584-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.890 inches and 1.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-001-1870 MPN 32-87850-77Waveguide Assembly
- 5930-00-074-0583 MPN 53-81620-31Push Switch
- 1560-00-082-9118 MPN 53-73301-321Aircraft Pylon
- 1560-00-125-8100 MPN 68A335031-1005Bracket Assembly
- 1560-00-130-9281 MPN 32-50172-301Aircraft Structural Component Support
- 1560-00-132-6515 MPN 53-790102-5Lightn Conduit Assy
- 1560-00-137-7642 MPN 32-30044-3Aircraft Structural Component Fitting
- 1560-00-139-3143 MPN 53-88019-1Aircraft Structural Component Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-100-1425 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA584-23 | Boeing Company, The |