NSN 5305-00-101-5697
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MA583-14 for national stock number 5305001015697.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-101-5697.
-
MPN or Model
3MA583-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.265 inches and 1.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.377 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-020-6252 MPN 32G31451-6001Splice Covering Skin
- 4820-00-021-2247 MPN 32-83116-12Butterfly Valve
- 1560-00-026-0824 MPN 32-30058-5Airfoil Rib
- 1680-00-071-7633 MPN 25-80064-4Airframe Clamp
- 1560-00-144-6826 MPN 32-15031-11Aircraft Access Door
- 1560-00-185-3317 MPN 32-11530-7Wing Rib Support
- 1560-00-280-0426 MPN 13SRF1144-2LAircraft Structural Plate
- 1560-00-282-1080 MPN 68A311952-2077Aircraft Skin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-101-5697 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA583-14 | Boeing Company, The |
3MFRA583-14 | Boeing Company, The |