NSN 5305-00-127-7514
High Torque Screw
Between 2.323 inches and 2.353 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1881 inches and 0.1887 inches .
Manufacturer part number NAS1153V33 for national stock number 5305001277514.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-127-7514.
-
MPN or Model
NAS1153V33
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.323 inches and 2.353 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas 621 comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-554-6465 MPN C905NWA12H0Aircraft Amber Lamp
- 5305-00-102-4553 MPN MS27039-6-17Machine Screw
- 5305-00-150-9209 MPN MILS7839Machine Screw
- 5305-00-150-9267 MPN MILS7839Machine Screw
- 5305-00-211-9114 MPN NAS1505-23Close Tolerance Screw
- 5305-00-263-9568 MPN MS24671-42Socket Head Cap Screw
- 5305-00-269-3218 MPN MS90725-68Hexagon Head Cap Screw
- 5305-00-281-3158 MPN MS24677-64Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-127-7514 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153V33 | National Aerospace Standards |