NSN 5305-00-143-1855
High Torque Screw
Between 1.437 inches and 1.484 inches fastener length, flat countersunk head style, between 0.634 inches and 0.668 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 106334-7-16 for national stock number 5305001431855.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1855.
-
MPN or Model
106334-7-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.427 inches and 0.494 inches -
Fastener Length
Between 1.437 inches and 1.484 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.634 inches and 0.668 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-1863 MPN 106334-7-20Close Tolerance Screw
- 5305-00-255-5517 MPN NAS1101-08-18Machine Screw
- 5305-00-900-4403 MPN 57999-1Socket Head Cap Screw
- 5305-00-928-2939 MPN 112-0716-112Socket Head Cap Screw
- 5305-01-004-8726 MPN NAS1190-04P8LSocket Head Cap Screw
- 5305-01-042-4406 MPN 67077-08-1Machine Screw
- 5305-01-046-0721 MPN ST3M505-4-5Shoulder Screw
- 5305-01-056-4415 MPN C7984-3-2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1855 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-7-16 | Sps Technologies, Llc |
202-15522-7-16 | Triumph Aerostructures, Llc |
106334-7-16 | Sps Technologies, Llc |