NSN 5306-00-281-7097
Coaxial Connector
Between 1.151 inches and 1.201 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number ST3M571-6-9 for national stock number 5306002817097.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-281-7097.
-
MPN or Model
ST3M571-6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.649 inches -
Fastener Length
Between 1.151 inches and 1.201 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
76301-st3-571 manufacturers standard
More from these suppliers
- 5305-01-435-9807 MPN BACB30LU5P11XClose Tolerance Screw
- 5305-01-462-2887 MPN TX1027C3-8AClose Tolerance Screw
- 5306-00-152-5509 MPN VAL23602-8DS024Close Tolerance Bolt
- 5306-01-045-2868 MPN VAL23608-4-23Shoulder Bolt
- 5306-01-261-1603 MPN 220121-7A14Shear Bolt
- 5306-01-274-4477 MPN VEP220121-4V28Shear Bolt
- 5306-01-343-1752 MPN VCC0090-12-55Shear Bolt
- 5306-01-376-1899 MPN VFC0001-3-15-DMachine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-281-7097 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M571-6-9 | Boeing Company, The |
BM3326-6-9 | Huck International, Inc. |
S371-6-9 | Huck International, Inc. |
VAL23033-6-9 | Valley-todeco, Inc. |
AIC752-6-9 | Sps Technologies, Llc |
ST3M571-6-9 | Sps Technologies, Llc |
S11-2059-6-9 | Sonic Industries Inc. |
47328-6-9 | Sps Technologies, Llc |
HLS3060-6-9 | Alcoa Global Fasteners, Inc. |
MB84-6-9 | Hi-shear Corporation |
MB84-6-9 | Lisi Aerospace Canada Corp |
ST3M571-6-9 | J M Precision Inc |
ST3M571-6-9 | Sps Technologies, Llc |
BM3326-6-9 | Huck Intl Inc |
S371-6-9 | Huck Intl Inc |