NSN 5305-00-143-1866
High Torque Screw
Between 1.362 inches and 1.409 inches fastener length, flat countersunk head style, between 0.362 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106334-4-17D for national stock number 5305001431866.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1866.
-
MPN or Model
106334-4-17D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.362 inches and 1.409 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.362 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 101.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.230 inches and 1.309 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-180-4842 MPN NAS1101E3-18Machine Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-304-8859 MPN 73573-92-8CSocket Head Cap Screw
- 5305-00-448-4629 MPN 66117H4-17Close Tolerance Screw
- 5305-00-754-3058 MPN NAS1203-10Close Tolerance Screw
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-00-905-4592 MPN NAS1190C6P28ISocket Head Cap Screw
- 5305-01-023-2976 MPN 20098H94C6Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1866 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-4-17D | Sps Technologies, Llc |
202-15522-4A17 | Triumph Aerostructures, Llc |
106334-4-17D | Sps Technologies, Llc |
106334-4-17D | Sps Technologies, Llc |
202-15522-4A17 | Triumph Aerostructures, Llc |
106334-4-17D | Sps Technologies, Llc |