NSN 5305-00-145-1055
Panel Screw
Between 0.546 inches and 0.578 inches fastener length, fillister head style, between 0.208 inches and 0.226 inches head diameter, head height: between 0.086 inches and 0.096 inches .
Manufacturer part number 10549081 for national stock number 5305001451055.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-145-1055.
-
MPN or Model
10549081
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.172 inches and 0.204 inches -
Fastener Length
Between 0.546 inches and 0.578 inches -
Head Style
Fillister -
Head Diameter
Between 0.208 inches and 0.226 inches -
Head Height
Between 0.086 inches and 0.096 inches -
First Diameter From Head
0.098 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.342 inches and 0.406 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5985-00-052-0222 MPN 10548178Directional Coupler
- 5985-00-187-7815 MPN 10559849-13Fixed Attenuator
- 5905-00-571-6064 MPN 7599055Film Fixed Resistor
- 5935-01-071-0648 MPN 11781388-7Electrical Connector Shell
- 5985-01-199-4608 MPN 12604567-1Fixed Attenuator
- 4920-01-463-3308 MPN 12979218Interface Device Adapter Assembly
- 5305-00-081-7193 MPN 8635087Thumbscrew
- 5305-00-962-5758 MPN 8624676Shoulder Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-145-1055 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
10549081 | Us Army Ardec Rdecom |