NSN 5305-00-145-2113
High Torque Screw
Between 1.777 inches and 1.824 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number SFT930-4-24 for national stock number 5305001452113.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-145-2113.
-
MPN or Model
SFT930-4-24
-
Schedule B
8112.99.1000 (Germanium and articles thereof, wrought, waste and scrap, powders, nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.777 inches and 1.824 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Vanadium -
Material Specification
Vasc0 jet m-a fscm 95402 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-061-5838 MPN 67077-4-6Machine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-508-5149 MPN LS15235C4-11Close Tolerance Screw
- 5305-00-587-8492 MPN 16990L6F12DSocket Head Cap Screw
- 5305-00-761-3556 MPN NAS1101-3-9Machine Screw
- 5305-01-044-2248 MPN SFH22D4A15Close Tolerance Screw
- 5305-01-084-4702 MPN HT4020-3-8AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-145-2113 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT930-4-24 | Sps Technologies, Llc |
VS2787T4C24 | Alcoa Global Fasteners, Inc. |
C079-4-24 | Sps Technologies, Llc |
C079-4-24 | Alcoa Global Fasteners, Inc. |
C079-4-24 | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)