NSN 5305-00-146-2511
High Torque Screw
Between 0.675 inches and 0.722 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT239PB4-6 for national stock number 5305001462511.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-146-2511.
-
MPN or Model
HT239PB4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.300 inches and 0.347 inches -
Fastener Length
Between 0.675 inches and 0.722 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5400 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-008-2555 MPN GC825AS74P1Electrical Receptacle Connector
- 5945-00-052-9823 MPN 123SCAV356-51Electromagnetic Relay
- 5935-00-059-1387 MPN GC15A4P16S8PElectrical Plug Connector
- 1680-00-075-0759 MPN 123AB11574-5Crew Seat Ba Handle
- 1680-00-075-3632 MPN GM510G1Rearview Mirror Assembly
- 1560-00-075-3740 MPN 123CP10011-2Control Column Guard Assembly
- 1560-00-092-5907 MPN 123CS10016-502Rudder Trim Tab
- 5985-00-100-4902 MPN 1128SCAV807-1Antenna
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-146-2511 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB4-6 | Hi-shear Corporation |
FF-S-85C TYPE 2 STYLE 10P | Federal Specifications |
GB510L4-6 | Northrop Grumman Systems Corporation |