NSN 5305-00-146-7207
High Torque Screw
Between 0.954 inches and 1.000 inches fastener length, flat countersunk head style, between 0.572 inches and 0.638 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number CS665-5-8 for national stock number 5305001467207.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-146-7207.
-
MPN or Model
CS665-5-8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.510 inches -
Fastener Length
Between 0.954 inches and 1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.572 inches and 0.638 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-144-1433 MPN NAS1101C04-8Machine Screw
- 5305-01-016-4343 MPN AIC812-3-6Machine Screw
- 5305-01-055-2832 MPN AIC985-3-12Close Tolerance Screw
- 5305-01-119-7188 MPN BACB30LU4-24Close Tolerance Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
- 5305-01-202-8964 MPN AIC823-22CMachine Screw
- 5305-01-561-6131 MPN HT4027-6D12Close Tolerance Screw
- 5305-01-627-2700 MPN JSFB34V06-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-146-7207 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CS665-5-8 | Textron Fastening Systems |
AIC792-5-8 | Sps Technologies, Llc |
64228V5-8 | Sps Technologies, Llc |
VT1040-5-8 | Arconic Global Fasteners & Rings, |
VT1040-5-8 | Alcoa Global Fasteners, Inc. |
64228V5-8 | Sps Technologies, Llc |
C792-5-8 | Sps Technologies, Llc |
C792-5-8 | Alcoa Global Fasteners, Inc. |
C792-5-8 | Lockheed Martin Corporation |