NSN 5305-00-150-3265
High Torque Screw
Between 0.385 inches and 0.432 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC83-3A2 for national stock number 5305001503265.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-150-3265.
-
MPN or Model
AIC83-3A2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.385 inches and 0.432 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.250 inches first hole and 0.331 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-431-7334 MPN NAS1102-04-24Machine Screw
- 5305-00-891-3674 MPN 207-12-2Shoulder Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-054-6243 MPN AIC9535-7-13Close Tolerance Screw
- 5305-01-062-3334 MPN NAS1101-06H10BMachine Screw
- 5305-01-084-5394 MPN NAS1101E08-12Machine Screw
- 5305-01-105-9373 MPN HT4068-3-2AClose Tolerance Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-150-3265 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC83-3A2 | Sps Technologies, Llc |
106334-3-2D | Sps Technologies, Llc |
VT1631-3-2T | Alcoa Global Fasteners, Inc. |
BA45132-3A2 | Huck International, Inc. |
202-15522-3A2 | Triumph Aerostructures, Llc |
BA45132-3A2 | Huck Intl Inc |
106334-3-2D | Sps Technologies, Llc |