NSN 5305-00-151-0205
Bolt Stove
0.375 inches fastener length, flat countersunk head style, between 0.150 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-2R6 for national stock number 5305001510205.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-0205.
-
MPN or Model
AN505-2R6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.339 inches and 0.375 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.150 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-386-7086 MPN 412291-1Electrical Receptacle Connector Body
- 4820-00-408-0807 MPN 420303-1Check Valve
- 5935-00-617-7834 MPN 507169-14S-9PElectrical Plug Connector
- 4920-01-073-8235 MPN 618906-1Aircraft Maintenance Stand
- 5930-01-208-3925 MPN A508967-10Push Switch
- 5935-01-211-2608 MPN 512228Electrical Connector Polarizing Key
- 5975-01-534-7874 MPN 4SE00442-1-27Electrical Nonmetallic Conduit Assembly
- 4920-01-547-7993 MPN 617253-9Static System Tester
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-0205 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-2R6 | Aeronautical Standards Group |
FFS92ANDTYPE3STYLE2C | Federal Specifications |
1175-2-6 | Naval Air Warfare Center Aircraft |