NSN 5305-00-151-3453
Bolt Stove
0.438 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN510-6-7 for national stock number 5305001513453.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-3453.
-
MPN or Model
AN510-6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.388 inches and 0.438 inches -
Fastener Length
0.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-5673 MPN AN3102A16S1SZElectrical Receptacle Connector
- 5935-00-241-7154 MPN AN3102M24-11PElectrical Receptacle Connector
- 5975-00-388-9061 MPN AN4028-5-8Cable Marker Sleeve
- 5935-00-556-7229 MPN AN3106A24-7PWElectrical Plug Connector
- 5935-00-643-6936 MPN AN3102C20-4PXElectrical Receptacle Connector
- 5935-00-148-9287 MPN AN3108B24-12SElectrical Plug Connector
- 5305-00-060-7883 MPN AN500AD416-6Machine Screw
- 5305-00-151-2892 MPN AN515B8-32Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-3453 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN510-6-7 | Aeronautical Standards Group |