NSN 5305-00-180-9303
High Torque Screw
Between 0.723 inches and 0.753 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 110121T3-6 for national stock number 5305001809303.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-180-9303.
-
MPN or Model
110121T3-6
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.723 inches and 0.753 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-4173 MPN 66117H5-17Close Tolerance Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-141-7319 MPN 66584-08-6Machine Screw
- 5305-00-470-8185 MPN SFT22-4A19Close Tolerance Screw
- 5305-00-519-7831 MPN HT4028L5-5Close Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-01-050-6478 MPN NAS1189E08P6HSocket Head Cap Screw
- 5305-01-141-7198 MPN HT4020-5-16AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-180-9303 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110121T3-6 | Sps Technologies, Llc |