NSN 5305-00-196-1270
Tap Bolt
4.250 inches fastener length, hexagon head style, between 0.348 inches and 0.371 inches head height, width between flats: between 0.798 inches and 0.813 inches .
Manufacturer part number FFS85 for national stock number 5305001961270.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-196-1270.
-
MPN or Model
FFS85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.375 inches -
Fastener Length
4.250 inches -
Head Style
Hexagon -
Head Height
Between 0.348 inches and 0.371 inches -
Width Between Flats
Between 0.798 inches and 0.813 inches -
Thread Diameter
0.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
70000 pounds per square inch -
Hardness Rating
74.0 brinell hultgren -
Minimum Yield Strength
30000 pounds per square inch -
Material
Steel -
Material Specification
Ffs-s-66, series 300 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-7417 MPN NAS1063A14-426Terminal Board Marker Strip
- 5935-01-616-1477 MPN MS3406D14S-2EElectrical Plug Connector
- 1560-01-652-3629 MPN NAS1834-3-750Aircraft Structural Panel
- 5305-00-008-5889 MPN NAS1102C08-9Machine Screw
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-051-4508 MPN MS51974-27Setscrew
- 5305-00-059-3675 MPN MS51958-79Machine Screw
- 5305-00-070-1895 MPN NAS1202-15Close Tolerance Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-196-1270 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FFS85 | Federal Specifications |
MS35308-449 | National Aerospace Standards |
MS35308-449 | Military Standards |