NSN 5305-00-207-1788
Bolt Stove
Between 0.954 inches and 0.999 inches fastener length, flat countersunk head style, between 0.337 inches and 0.387 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number NAS517-3-9 for national stock number 5305002071788.
Datasheet
-
Product description
Machine Screw NSN 5305-00-207-1788.
-
MPN or Model
NAS517-3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.315 inches and 0.452 inches -
Fastener Length
Between 0.954 inches and 0.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.387 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-827-6557 MPN NAS1063A4-1Terminal Board Marker Strip
- 5305-00-004-5099 MPN NAS662C2LLR16Socket Head Cap Screw
- 5305-00-068-0541 MPN MS24677-30Socket Head Cap Screw
- 5305-00-088-8332 MPN MS35190-272Machine Screw
- 5305-00-119-7575 MPN NAS1633-42Machine Screw
- 5305-00-121-8886 MPN MS27577-4-14Close Tolerance Screw
- 5305-00-203-1253 MPN NAS1635-04-18Machine Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-207-1788 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-3-9 | National Aerospace Standards |