NSN 5305-00-222-1911
High Torque Screw
Between 2.136 inches and 2.166 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 7S37-3A30 for national stock number 5305002221911.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-222-1911.
-
MPN or Model
7S37-3A30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.136 inches and 2.166 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-336-2350 MPN 190-48202-2Aircraft Fuel Tank
- 5975-00-570-9598 MPN LE127-0011-0007Electrical Components Tiedown Strap
- 1560-00-678-4848 MPN 265-321200 REVISION LNose Nacelle Angle
- 1560-01-121-4709 MPN 187-53117-3Pin Assembly
- 4920-01-191-1543 MPN R-TBD-2150Test Adapter Set
- 1560-01-192-7464 MPN L3226655-002Aircraft Structural Panel
- 1560-01-292-5476 MPN L5416961-081Aircraft Structural Plate
- 1560-01-299-7993 MPN L1800093-021Aircraft Skin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-222-1911 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S37-3A30 | Boeing Company, The |