NSN 5305-00-331-8032
Tap Bolt
Between 0.719 inches and 0.781 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.4280 inches and 0.4375 inches .
Manufacturer part number MS35303-6 for national stock number 5305003318032.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-331-8032.
-
MPN or Model
MS35303-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.719 inches and 0.781 inches -
Fastener Length
Between 0.719 inches and 0.781 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.4280 inches and 0.4375 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Material Specification
Qq-s-624 federal specification single material response -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-204-7132 MPN 6815574-2Grounding Metallic Shielded Cable Ferrule
- 5930-00-253-7450 MPN D1522Push-pull Switch
- 5940-00-353-9669 MPN 1883629Stud Terminal
- 4920-00-601-0900 MPN 6504567Multiposition Maintenance Fixture Holder
- 5940-00-666-2793 MPN 1865535Terminal Board
- 5935-00-772-2241 MPN 5293214Electrical Connector Backshell
- 4920-00-862-5725 MPN 6799235-201Engine Pin Retainer
- 5305-00-013-2096 MPN 132096Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
![Mechanic Bill explains Tap Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-331-8032 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35303-6 | Military Standards |
454894 | General Motors Corp |
Stock Check
![](/public/images/partscage_shelf3.png)