NSN 5305-00-347-7840
High Torque Screw
Between 1.323 inches and 1.353 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15265V3-17 for national stock number 5305003477840.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-347-7840.
-
MPN or Model
LS15265V3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.323 inches and 1.353 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams4928 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-680-4808 MPN LL500-4-4MMachine Screw
- 5305-00-690-6919 MPN LH90725-14Hexagon Head Cap Screw
- 5305-01-469-2786 MPN LP51957-14HQMachine Screw
- 5306-00-946-8355 MPN LL20074-04-07Machine Bolt
- 5305-00-687-6281 MPN NKS24694S52Socket Head Cap Screw
- 5305-01-369-1397 MPN 3140090-3Machine Screw
- 5306-00-620-2912 MPN NK4-6AMachine Bolt
- 5306-01-359-9322 MPN P4ML420-18PMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-347-7840 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V3-17 | Lockheed Martin Corporation |
LS15265V3-17 | Long-lok Fasteners Corporation |
LS15265V3-17 | Nylok Corporation |
LS15265V3-17 | Sps Technologies, Llc |
LS15265V3-17 | Alcoa Global Fasteners, Inc. |