NSN 5305-00-354-6063
High Torque Screw
Between 0.516 inches and 0.546 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4024L3D2 for national stock number 5305003546063.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-354-6063.
-
MPN or Model
HT4024L3D2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.516 inches and 0.546 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.395 inches first hole and 0.435 inches first hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-356-1623 MPN LS15265V3-2Close Tolerance Screw
- 5305-00-399-0212 MPN HT4024L6-10Close Tolerance Screw
- 5305-01-141-7896 MPN HT4049-4-11XShoulder Screw
- 5305-01-195-5828 MPN SC1779-4-23Close Tolerance Screw
- 5305-01-208-6723 MPN HT4016-4-15XShoulder Screw
- 5305-01-284-8381 MPN VT1694F5-20Close Tolerance Screw
- 5305-01-367-9829 MPN SC5046U3-7Close Tolerance Screw
- 5305-01-381-1408 MPN SC5053-4-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-354-6063 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L3D2 | Hi-shear Corporation |
HT4024L3D2 | Arconic Global Fasteners & Rings, |
HT4024L3D2 | Huck International, Inc. |
ST3M455-3DL2-1 | Fastener Innovation Technology, Inc. |
WC4024L3D2 | West Coast Aerospace Inc |
HT4024L3D2 | Sps Technologies, Llc |
HT4024L3D2 | Lisi Aerospace Canada Corp |
ST3M455-3LD2-1 | Boeing Company, The |
11907-3LD2-1 | Reid Products Inc. |
HT4024L3D2 | Sps Technologies Ltd Tj Brooks |
ST3M455-3DL2-1 | Boeing Company, The |
HT4024L3D2 | Sps Technologies Inc |