NSN 5305-00-399-0950
High Torque Screw
Between 0.448 inches and 0.495 inches fastener length, flat countersunk head style, between 0.280 inches and 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT202-3-3 for national stock number 5305003990950.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-399-0950.
-
MPN or Model
HT202-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.260 inches and 0.307 inches -
Fastener Length
Between 0.448 inches and 0.495 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
253 fscm 74197 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1207 MPN HST73DUW-6Mat Aircraft Collar
- 5305-00-346-3639 MPN HT4024L3D3-1Close Tolerance Screw
- 5305-00-450-5997 MPN NAS1121-6Close Tolerance Screw
- 5305-00-508-6241 MPN LS15235C3-5Close Tolerance Screw
- 5305-00-522-9629 MPN HT4025L4D11Close Tolerance Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-764-3035 MPN HT6UA6-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-399-0950 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT202-3-3 | Hi-shear Corporation |
HT202-3-3 | Lisi Aerospace Canada Corp |