NSN 5305-00-465-5488
High Torque Screw
Hexegon recess,thread end 0.1270 in. Min,0.1295 in. Max across flats 0.125 in. Deep.
Manufacturer part number HR112-4-13 for national stock number 5305004655488.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-465-5488.
-
MPN or Model
HR112-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.475 inches and 0.515 inches -
Fastener Length
Between 0.840 inches and 0.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.492 inches and 0.512 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.345 inches and 0.365 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-182-9576 MPN NAS1101-3H3Machine Screw
- 5305-00-505-3442 MPN LS15237C3-3Close Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-00-932-3903 MPN HT4V-16Machine Screw
- 5305-00-951-0394 MPN NAS1121-5HClose Tolerance Screw
- 5305-01-045-3023 MPN HT4016-3-7YSocket Head Cap Screw
- 5305-01-050-4310 MPN HT4008-3-8Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-465-5488 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR112-4-13 | Hi-shear Corporation |
VT1657-4-13 | Alcoa Global Fasteners, Inc. |
HR112-4-13 | Lisi Aerospace Canada Corp |
C3606-13 | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)