NSN 5305-00-411-3218
High Torque Screw
Between 0.576 inches and 0.606 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 110121T4-3 for national stock number 5305004113218.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-411-3218.
-
MPN or Model
110121T4-3
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.576 inches and 0.606 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-432-4663 MPN NAS1124-12Close Tolerance Screw
- 5305-00-454-1230 MPN NAS1133V10Close Tolerance Screw
- 5305-00-685-1439 MPN NAS1123-8Close Tolerance Screw
- 5305-00-801-7103 MPN 51B221-21HClose Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-00-905-5109 MPN 427976Machine Screw
- 5305-00-941-0230 MPN 502745Screwxspecial
- 5305-01-054-6248 MPN 121754-7-22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-411-3218 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110121T4-3 | Sps Technologies, Llc |