NSN 5305-00-414-2576
High Torque Screw
Between 1.501 inches and 1.531 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 3MFRA1506-18T for national stock number 5305004142576.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-414-2576.
-
MPN or Model
3MFRA1506-18T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.501 inches and 1.531 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4130 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate and paint -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response and mac primer 13421 fscm 76301 mfr ref 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-356-1790 MPN NAS1189E06T4Socket Head Cap Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-761-4229 MPN HT6UA18Machine Screw
- 5305-00-826-4704 MPN NAS1204-20DClose Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-035-9549 MPN HT0408-5D16Close Tolerance Screw
- 5305-01-046-5459 MPN HT4009-4-20Shoulder Screw
- 5305-01-076-6318 MPN 51B581-5-22HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-414-2576 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA1506-18T | Hi-shear Corporation |
3MFRA1506-18T | Sps Technologies, Llc |
3MFRA1506-18T | Boeing Company, The |