NSN 5305-00-414-3208
High Torque Screw
Between 1.150 inches and 1.180 inches fastener length, between 0.1580 inches and 0.1585 inches grip diameter, hexagon internal drive style, thread diameter: 0.164 inches.
Manufacturer part number 887516-1 for national stock number 5305004143208.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-414-3208.
-
MPN or Model
887516-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.360 inches and 0.400 inches -
Fastener Length
Between 1.150 inches and 1.180 inches -
Grip Diameter
Between 0.1580 inches and 0.1585 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.164 inches -
Grip Length
Between 0.750 inches and 0.820 inches -
Width Across Flats
Between 0.078 inches and 0.080 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-426-9601 MPN 3182604-4Nonprecision Nonwire Wound Variable Resistor
- 5935-00-799-2128 MPN 1052037Electrical Connector Backshell
- 4820-01-067-8270 MPN 3311997 ITEM 45Valve Quill
- 4820-01-150-3295 MPN 3189119-36Fluid Valve Stem
- 5945-01-183-3768 MPN 967058-15Armature Stop
- 4820-01-362-1752 MPN 3162021-2Valve Seat
- 4820-01-442-7207 MPN 4101088-74Valve Cap
- 4820-01-430-3142 MPN 3338411-9Actuating Rod
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-414-3208 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
887516-1 | Honeywell International Inc. |
887516-1 | Honeywell International Inc. |