NSN 5306-00-717-7674
Coaxial Connector
4.431 inches fastener length, double hexagon w/hole head style, 0.711 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number MS21250-12054 for national stock number 5306007177674.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-717-7674.
-
MPN or Model
MS21250-12054
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.056 inches -
Fastener Length
4.431 inches -
Head Style
Double hexagon w/hole -
Head Height
0.711 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Single Shear Strength
108000 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
3.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-102-0312 MPN 3M926-5L16Close Tolerance Screw
- 5305-01-178-9308 MPN ST3M557-3-5Close Tolerance Screw
- 5305-01-406-3075 MPN 3M925C3-11AClose Tolerance Screw
- 5305-01-452-2163 MPN LD111-0046-2418Close Tolerance Screw
- 5305-01-462-2742 MPN ST3M652C6-23AClose Tolerance Screw
- 5305-01-462-2848 MPN 3M1169V3-3AClose Tolerance Screw
- 5306-00-091-3877 MPN VFK100G-04006Shear Bolt
- 5306-00-121-8184 MPN MS21250-07034Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-717-7674 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-12054 | Military Standards |
MS21250-12054 | Sps Technologies, Llc |
MS21250-12054 | Arconic Global Fasteners & Rings, |
MS21250-12054 | Sps Technologies, Llc |
MS21250-12054 | Sps Technologies, Llc |
MS21250-12054 | Hi-shear Corporation |
MS21250-12054 | Alcoa Global Fasteners, Inc. |
MS2125012054 | Huck International, Inc. |
MS21250-12054 | Mercury Aerospace Fasteners Inc |
MS21250-12054 | Huck Intl Inc |
MS2125012054 | Huck Intl Inc |
VAL21013-12054 | Valley-todeco, Inc. |