NSN 5305-00-450-4084
High Torque Screw
Bearing surface of head to be grooved to 0.394 in. Min 0.396 in. Max dia,0.092 in. Min 0.097 in. Max from top of head.
Manufacturer part number HR101H5-14 for national stock number 5305004504084.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-450-4084.
-
MPN or Model
HR101H5-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.423 inches and 0.473 inches -
Fastener Length
Between 1.308 inches and 1.338 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.531 inches and 0.558 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 59.75 degrees and 60.25 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-013-3187 MPN LS15265V3-20Close Tolerance Screw
- 5305-01-021-3737 MPN NAS1101E04-13Machine Screw
- 5305-01-084-5393 MPN NAS1101-4-11BMachine Screw
- 5305-01-359-1472 MPN AIC4038-4-58Machine Screw
- 5305-01-381-2172 MPN 1701-3-13Close Tolerance Screw
- 5305-01-605-1300 MPN BACS12ER04K18Machine Screw
- 5305-01-661-5574 MPN BACB30ZG4-7Close Tolerance Screw
- 5306-00-047-3457 MPN MS21250-09048Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-450-4084 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H5-14 | Hi-shear Corporation |
VT1039H5-14 | Alcoa Global Fasteners, Inc. |
CS318642H5-14 | Textron Fastening Systems |
AIC1023H5-14 | Sps Technologies, Llc |
HR101H5-14 | Lisi Aerospace Canada Corp |
C387H5-14 | Lockheed Martin Corporation |