NSN 5305-00-450-7446
High Torque Screw
Between 1.280 inches and 1.327 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number SFT930-5-15 for national stock number 5305004507446.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-450-7446.
-
MPN or Model
SFT930-5-15
-
Schedule B
8112.99.1000 (Germanium and articles thereof, wrought, waste and scrap, powders, nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.332 inches and 0.399 inches -
Fastener Length
Between 1.280 inches and 1.327 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Vanadium alloy -
Material Specification
Vanadium alloy m-a, vanadium alloys steel co mfr ref single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-097-7485 MPN AIC812-06-10Machine Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
- 5305-00-310-6180 MPN AIC812-02-9Machine Screw
- 5305-00-310-6419 MPN HT4028L8-11Close Tolerance Screw
- 5305-00-917-6131 MPN AIC1023H4-25Machine Screw
- 5305-00-932-1831 MPN 51B581-3-4Machine Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-450-7446 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT930-5-15 | Sps Technologies, Llc |
AIC79-5-15 | Sps Technologies, Llc |
C079-5-15 | Arconic Global Fasteners & Rings, |
C079-5-15 | Lockheed Martin Corporation |
VS2787T5C15 | Alcoa Global Fasteners, Inc. |