NSN 5305-00-453-7885
High Torque Screw
Between 0.447 inches and 0.457 inches fastener length, pan no. 2 head style, 0.500 inches head diameter, head height: between 0.130 inches and 0.140 inches .
Manufacturer part number 12W9875-11 for national stock number 5305004537885.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-453-7885.
-
MPN or Model
12W9875-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.235 inches and 0.307 inches -
Fastener Length
Between 0.447 inches and 0.457 inches -
Head Style
Pan no. 2 -
Head Diameter
0.500 inches -
Head Height
Between 0.130 inches and 0.140 inches -
Grip Diameter
Between 0.1880 inches and 0.1890 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
0.150 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Fms0131 fscm 81755 mfr ref single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-129-0821 MPN 12A15047-1Test Adapter
- 4920-00-163-8293 MPN P504-2Simulat Nylon Block
- 5905-00-189-2266 MPN C5123-1C162GMFilm Fixed Resistor
- 1560-00-225-8112 MPN 12H1117-1Aircraft Structural Component Support
- 5950-00-300-2394 MPN 583Z2376-7Electrical Coil
- 1560-00-403-8613 MPN 12F2111-803Console Cover Assembly
- 1560-00-499-6105 MPN 12Y980-821Drain Tube Assembly
- 5935-00-969-6811 MPN C7170-1Electrical Connector Backshell
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-453-7885 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12W9875-11 | Lockheed Martin Corporation |