NSN 5305-00-464-2774
High Torque Screw
Between 1.185 inches and 1.222 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106334-4-14 for national stock number 5305004642774.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-464-2774.
-
MPN or Model
106334-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.185 inches and 1.222 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
45.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel -
Material Specification
Sps-m-107 cagec 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-163-6802 MPN NAS1121E15Close Tolerance Screw
- 5305-00-680-7500 MPN NAS1203-12DClose Tolerance Screw
- 5305-00-925-7867 MPN NAS1203-46DClose Tolerance Screw
- 5305-00-935-7579 MPN 3M50-4-19Shoulder Screw
- 5305-00-945-4374 MPN 812Socket Head Cap Screw
- 5305-01-021-6845 MPN HT4028L4-2Close Tolerance Screw
- 5305-01-043-8056 MPN 67077-3-60Close Tolerance Screw
- 5305-01-046-5462 MPN HT4010-5-7Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-464-2774 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-4-14 | Sps Technologies, Llc |
106334-4-14 | Sps Technologies, Llc |