NSN 5305-00-472-2767
High Torque Screw
Between 1.072 inches and 1.119 inches fastener length, flat countersunk head style, 0.757 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number VT1650-1 for national stock number 5305004722767.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-472-2767.
-
MPN or Model
VT1650-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.512 inches and 0.579 inches -
Fastener Length
Between 1.072 inches and 1.119 inches -
Head Style
Flat countersunk -
Head Diameter
0.757 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.540 inches and 0.560 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-130-3260 MPN SC2671-3-8Machine Screw
- 5305-01-352-2075 MPN VCL0008-3-6Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-623-9302 MPN VT10021-3-17Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-00-905-8448 MPN VFK100G-04004Shear Bolt
- 5306-01-054-3421 MPN VCG0009L6-18Shear Bolt
- 5306-01-141-7886 MPN VAL23608-6-34Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-472-2767 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1650-1 | Alcoa Global Fasteners, Inc. |
VAL42002 | Valley-todeco, Inc. |
AIC4308-1 | Sps Technologies, Llc |
70316-1 | Sps Technologies, Llc |
VT1650-1 | Arconic Global Fasteners & Rings, |
C4308-1 | Lockheed Martin Corporation |