NSN 5305-00-476-7494
High Torque Screw
Between 0.385 inches and 0.415 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number VT1051-3-2 for national stock number 5305004767494.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-476-7494.
-
MPN or Model
VT1051-3-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.244 inches and 0.306 inches -
Fastener Length
Between 0.385 inches and 0.415 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.109 inches and 0.141 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4130 or steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-040-9431 MPN HT8140-4-23Close Tolerance Screw
- 5305-00-057-1725 MPN NAS1101-08-5Machine Screw
- 5305-00-460-3031 MPN C792-5-11Close Tolerance Screw
- 5305-00-815-0692 MPN NAS1122-4HClose Tolerance Screw
- 5305-00-913-7957 MPN NAS1101-4-15Machine Screw
- 5305-00-916-4613 MPN VT1039H6-22Machine Screw
- 5305-01-046-2074 MPN HT4016-4-20YShoulder Screw
- 5305-01-046-5462 MPN HT4010-5-7Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-476-7494 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1051-3-2 | Alcoa Global Fasteners, Inc. |