NSN 5305-00-533-9463
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369-414 for national stock number 5305005339463.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-533-9463.
-
MPN or Model
MS3369-414
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.293 inches and 1.313 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.875 inches and 0.891 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-398-0289 MPN CA21062-10-5-10Setscrew
- 5306-01-096-5596 MPN AS468-104Machine Bolt
- 5306-01-537-0083 MPN AS522-7-42Machine Bolt
- 5940-00-082-5023 MPN MS18029-2S12Terminal Board Cover
- 5935-00-166-0219 MPN MS3101F12S3SElectrical Plug Connector
- 5935-00-201-1113 MPN MS27497E22B2SElectrical Receptacle Connector
- 5935-00-201-3851 MPN MS3102C20-6PElectrical Receptacle Connector
- 5935-00-201-4154 MPN MS3100A14S5SElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-533-9463 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-414 | Military Standards |
CA2658-4-14 | Arconic Global Fasteners & Rings, |
AS169-4-14 | Avibank Mfg., Inc. |
CA2658-4-14 | Siemens Ag - Anl A44 S - |