NSN 5305-00-557-8239
High Torque Screw
Between 0.676 inches and 0.706 inches fastener length, flat countersunk head style, between 0.363 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number VT1051-4-6 for national stock number 5305005578239.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-557-8239.
-
MPN or Model
VT1051-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.220 inches and 0.341 inches -
Fastener Length
Between 0.676 inches and 0.706 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.363 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-803-9577 MPN 51B222-7Machine Screw
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-013-9598 MPN HT8177-7D19Close Tolerance Screw
- 5305-01-032-5377 MPN HT405A5-16Shoulder Screw
- 5305-01-142-7224 MPN HT4020-5-12AYShoulder Screw
- 5305-01-195-9571 MPN SC1785RV3-2Machine Screw
- 5305-01-210-0793 MPN ST3M505-7-17Shoulder Screw
- 5305-01-248-4490 MPN HT4060V5-13DShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-557-8239 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1051-4-6 | Arconic Global Fasteners & Rings, |
VT1051-4-6 | Alcoa Global Fasteners, Inc. |