NSN 5305-00-809-1737
High Torque Screw
Between 1.180 inches and 1.187 inches fastener length, flat countersunk head style, 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B333-15 for national stock number 5305008091737.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-809-1737.
-
MPN or Model
51B333-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.180 inches and 1.187 inches -
Head Style
Flat countersunk -
Head Diameter
0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.920 inches and 0.940 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 1 federal specification 1st treatment response or qq-p-416 type 2 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-143-2038 MPN 3MA335CFA5Close Tolerance Screw
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-00-927-7898 MPN AIC82-3-15Machine Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-169-0014 MPN LD111-0047-2306Close Tolerance Screw
- 5305-01-196-5091 MPN LD111-0044-2422Close Tolerance Screw
- 5305-01-196-5092 MPN LE111-0038-2407Close Tolerance Screw
- 5305-01-202-8325 MPN BACS12CK3U16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-809-1737 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B333-15 | Northrop Grumman Technical Services, |
51B333-15 | Northrop Grumman Systems Corporation |
51B333-15 | Arconic Global Fasteners & Rings, |
51B333-15 | Sps Technologies, Llc |
51B333-15 | Huck International, Inc. |
51B333-15 | Sps Technologies, Llc |
51B333-15 | Hi-shear Corporation |
51B333-15 | Alcoa Global Fasteners, Inc. |
51B333-15 | Lisi Aerospace Canada Corp |