NSN 5305-00-810-1266
High Torque Screw
Between 2.770 inches and 2.837 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2482 inches and 0.2487 inches .
Manufacturer part number 51B334-40H for national stock number 5305008101266.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-810-1266.
-
MPN or Model
51B334-40H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 2.770 inches and 2.837 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2482 inches and 0.2487 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 2.470 inches and 2.490 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.116 inches first hole -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp e4340 -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 1 federal specification 1st treatment response or qq-p-416 type 2 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-487-5081 MPN AIC793-4-10Close Tolerance Screw
- 5305-00-769-1660 MPN NAS1101E04-43Machine Screw
- 5305-00-809-0730 MPN 51B334-12Machine Screw
- 5305-00-928-2517 MPN A1C82-5-17Machine Screw
- 5305-01-188-7592 MPN LE111-0038-2408Close Tolerance Screw
- 5305-01-236-2898 MPN C9535-6-20Close Tolerance Screw
- 5305-01-350-2246 MPN AIC1658-4A11Close Tolerance Screw
- 5305-01-381-5723 MPN AIC1652-4-39Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-810-1266 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B334-40H | Northrop Grumman Technical Services, |
51B334-40H | Northrop Grumman Systems Corporation |
51B334-40H | Sps Technologies, Llc |
51B334-40H | Sps Technologies, Llc |
51B334-40H | Sps Technologies, Llc |
51B334-40H | Hi-shear Corporation |
51B334-40H | Alcoa Global Fasteners, Inc. |
51B334-40H | Lisi Aerospace Canada Corp |
51B334-40H | Berco Mfg Co |