NSN 5305-00-815-6117
High Torque Screw
Between 1.010 inches and 1.057 inches fastener length, flat countersunk head style, between 0.329 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B333-12H for national stock number 5305008156117.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-815-6117.
-
MPN or Model
51B333-12H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.010 inches and 1.057 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.329 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.909 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 1 federal specification 1st treatment response or qq-p-416 type 2 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-928-2348 MPN AIC79-4-10Machine Screw
- 5305-01-054-6276 MPN AIC985-5-9Close Tolerance Screw
- 5305-01-066-6736 MPN NAS1101E3H24Machine Screw
- 5305-01-240-7397 MPN 3M925C4-20AClose Tolerance Screw
- 5305-01-329-9954 MPN AIC4414-3-20Machine Screw
- 5305-01-332-7124 MPN 1701-4-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-815-6117 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B333-12H | Northrop Grumman Technical Services, |
51B333-12H | Sps Technologies, Llc |
51B333-12H | Arconic Global Fasteners & Rings, |
51B333-12H | Huck International, Inc. |
51B333-12H | Hi-shear Corporation |
51B333-12H | Alcoa Global Fasteners, Inc. |
51B333-12H | Lisi Aerospace Canada Corp |
51B333-12H | Molex Incorporated |
51B333-12H | Northrop Grumman Systems Corporation |
51B333-12H | Sps Technologies, Llc |