NSN 5305-00-820-8107
Bolt Stove
0.375 inches fastener length, flat countersunk head style, between 0.177 inches and 0.225 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102C04-6 for national stock number 5305008208107.
Datasheet
-
Product description
Machine Screw NSN 5305-00-820-8107.
-
MPN or Model
NAS1102C04-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.375 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.177 inches and 0.225 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
Between 248.0 brinell standard and 321.0 brinell standard -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5735 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-470-3351 MPN NAS1063A20-500BETerminal Board Marker Strip
- 1680-01-535-3482 MPN NAS42DD6A-11NAircr Sleeve Spacer
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-003-8157 MPN NAS1351-5-10PSocket Head Cap Screw
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-016-8175 MPN MS27039-5-27Machine Screw
- 5305-00-054-2266 MPN MS24678-60CSocket Head Cap Screw
- 5305-00-058-4072 MPN NAS1133E2Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-820-8107 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102C04-6 | National Aerospace Standards |