NSN 5305-00-825-3255
High Torque Screw
Retaining element in shank.
Manufacturer part number AS104-04-13 for national stock number 5305008253255.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-825-3255.
-
MPN or Model
AS104-04-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.270 inches and 0.323 inches -
Fastener Length
Between 1.250 inches and 1.270 inches -
Head Style
Flat chamfer -
Head Diameter
0.437 inches -
Head Height
0.273 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.812 inches and 0.832 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.151 inches first hole -
Material
Steel -
Material Specification
Fms-0131 fscm 14170 mfr ref single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-083-7175 MPN CA28102-3-10HSPanel Screw Assembly
- 5305-01-275-8443 MPN CA21242C-06-8-10Machine Screw
- 5305-01-466-6895 MPN CA22001C08-9-9Hexag Captive Screw
- 5306-01-124-5771 MPN CA12020-1AInternal Wrenching Bolt
- 5905-00-133-0392 MPN C5110-1G115JSComposition Fixed Resistor
- 1560-00-137-4002 MPN 12W523-50Aircraft Structural Component Support
- 1560-00-335-5058 MPN 12W6310-833Aircraft Leading Edge
- 1560-00-438-4574 MPN 12W8983-5Aircraft Structural Component Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-825-3255 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-13 | Avibank Mfg., Inc. |
CA2730-4-13 | Arconic Global Fasteners & Rings, |
CC00035-4-13 | Arconic Global Fasteners & Rings, |
CC00035-4-13 | Lockheed Martin Corporation |