NSN 5305-00-827-3269
High Torque Screw
Between 1.449 inches and 1.479 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1203-19W for national stock number 5305008273269.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-827-3269.
-
MPN or Model
NAS1203-19W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.449 inches and 1.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5940-00-168-3316 MPN NAS1387-3Conductor Splice
- 5940-01-391-1828 MPN NAS1063B46-50Terminal Board Marker Strip
- 5305-00-007-9880 MPN NAS1100E04-5PMachine Screw
- 5305-00-009-0517 MPN NAS1393E00-7Machine Screw
- 5305-00-069-5215 MPN NAS1351C4-36Socket Head Cap Screw
- 5305-00-082-1656 MPN NAS1081C06A3Setscrew
- 5305-00-150-3484 MPN NAS1190C3P12Socket Head Cap Screw
- 5305-00-207-3736 MPN NAS517-4-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-827-3269 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-19W | National Aerospace Standards |