NSN 5305-00-842-1583
High Torque Screw
Two locking detents on the shank.
Manufacturer part number AS104-04-24 for national stock number 5305008421583.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-842-1583.
-
MPN or Model
AS104-04-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.270 inches -
Fastener Length
Between 1.938 inches and 1.978 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
0.263 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.500 inches and 1.520 inches -
Width Across Flats
Between 0.1875 inches and 0.1900 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
2040 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.990 inches all holes and 0.119 inches all holes -
Surface Finish
32.0 microinches threads -
Material
Steel comp 440c -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-437-8935 MPN CA2820-13SPanel Screw Assembly
- 5305-01-087-7016 MPN CA2658-4-87Close Tolerance Screw
- 5305-01-154-8487 MPN CA13095-10-3-14Panel Screw Assembly
- 5305-01-195-5059 MPN CA2193-3-05Close Tolerance Screw
- 5305-01-359-2510 MPN CA2227-08-3-8Machine Screw
- 5305-01-408-2104 MPN CA28014-1Panel Screw Assembly
- 5305-01-542-6559 MPN CA22062-10-10-17Panel Screw Assembly
- 5306-01-466-7104 MPN CA21354-2Internal Wrenching Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-842-1583 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-24 | Avibank Mfg., Inc. |
CA2730-4-24 | Arconic Global Fasteners & Rings, |
CC00035-4-24 | Lockheed Martin Corporation |