NSN 5305-00-842-1641
High Torque Screw
Retaining element in shank.
Manufacturer part number AS104-05-12 for national stock number 5305008421641.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-842-1641.
-
MPN or Model
AS104-05-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.312 inches and 0.332 inches -
Fastener Length
1.290 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.436 inches and 0.437 inches -
Head Height
Between 0.253 inches and 0.273 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
Between 0.750 inches and 0.790 inches -
Width Across Flats
Between 0.210 inches and 0.221 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.144 inches first hole -
Material
Steel comp 630 -
Material Specification
Fms 0131 fscm 81755 mfr ref single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Zc00035 fsmc 29372 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-535-6803 MPN CA17248-6-7-2Turnlock Receptacle
- 5305-00-161-0647 MPN CA1352B-2-9Panel Screw Assembly
- 5305-01-076-9411 MPN CA2898-14SKPanel Screw Assembly
- 5305-01-194-0657 MPN CA13170-06-2-8HSPanel Screw Assembly
- 5305-01-195-7944 MPN CA21017-4-20Close Tolerance Screw
- 5305-01-396-4287 MPN CA28181-03Panel Screw Assembly
- 5305-01-509-6243 MPN CA2292-10-21-18Panel Screw Assembly
- 5306-00-408-6858 MPN CA4510-4-21Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-842-1641 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-05-12 | Avibank Mfg., Inc. |
CA2730-5-12 | Arconic Global Fasteners & Rings, |
CC00035-5-12 | Lockheed Martin Corporation |