NSN 5305-00-857-2054
Bolt Stove
Between 0.603 inches and 0.607 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, internal drive style: high-torque.
Manufacturer part number NAS1503-5 for national stock number 5305008572054.
Datasheet
-
Product description
Machine Screw NSN 5305-00-857-2054.
-
MPN or Model
NAS1503-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.271 inches and 0.281 inches -
Fastener Length
Between 0.603 inches and 0.607 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 42.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-348-4727 MPN NAS1063C7-1Terminal Board
- 5305-00-005-9071 MPN NAS1352-06H12PSocket Head Cap Screw
- 5305-00-018-7514 MPN NAS1220-5E10Machine Screw
- 5305-00-052-7434 MPN MS24629-60Tapping Screw
- 5305-00-060-4372 MPN NAS1133-16Close Tolerance Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-082-1656 MPN NAS1081C06A3Setscrew
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-857-2054 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1503-5 | National Aerospace Standards |
Stock Check
- NE: 1612
- NS: 1918