NSN 5305-00-889-3183
High Torque Screw
Between 1.390 inches and 1.437 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number NAS333CP13 for national stock number 5305008893183.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-889-3183.
-
MPN or Model
NAS333CP13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
2620 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.257 inches first hole and 1.277 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5940-01-380-7244 MPN NAS1063B45-60Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-043-0410 MPN NAS1123-1HClose Tolerance Screw
- 5305-00-052-9048 MPN MS24630-33Tapping Screw
- 5305-00-070-3118 MPN NAS1633C6Machine Screw
- 5305-00-071-1776 MPN MS90725-123Hexagon Head Cap Screw
- 5305-00-182-9363 MPN NAS1633-30Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-889-3183 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CP13 | National Aerospace Standards |