NSN 5305-00-919-5082
High Torque Screw
Between 1.235 inches and 1.265 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155V14 for national stock number 5305009195082.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-919-5082.
-
MPN or Model
NAS1155V14
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 1.235 inches and 1.265 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1155 professional/industrial association standard
More from these suppliers
- 5305-00-057-0490 MPN MS24694-S4Machine Screw
- 5305-00-067-5156 MPN MS21295-30Socket Head Cap Screw
- 5305-00-081-6298 MPN NAS585-11Machine Screw
- 5305-00-170-1606 MPN NAS664V5HTClose Tolerance Screw
- 5305-00-206-1189 MPN NAS220-26Machine Screw
- 5305-00-244-2880 MPN NAS623-4-13Machine Screw
- 5305-00-261-4291 MPN NAS1102-04-22Machine Screw
- 5305-00-282-9939 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-919-5082 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V14 | National Aerospace Standards |