NSN 5305-00-919-5102
High Torque Screw
Between 2.011 inches and 2.041 inches fastener length, flat countersunk head style, between 0.280 inches and 0.327 inches head diameter, grip diameter: 0.1625 inches .
Manufacturer part number NAS1152-28 for national stock number 5305009195102.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-919-5102.
-
MPN or Model
NAS1152-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 2.011 inches and 2.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.327 inches -
Grip Diameter
0.1625 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-054-9239 MPN MS24694C97Machine Screw
- 5305-00-057-9586 MPN MS35199-12Machine Screw
- 5305-00-058-4012 MPN MS24694-107Machine Screw
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
- 5305-00-150-9263 MPN MILS7839Machine Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-210-4867 MPN NAS1207-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-919-5102 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152-28 | National Aerospace Standards |